Table of Contents
Advertisement
®
ABB i-bus
KNX
Parameters
Object name
Valve override disable/enable
The module has this output socket if the 3-way valve (mixing valve) option or the 2-way valve option is selected for the
type
Outputs whether the override of the cooling distribution circuit's valve is active or inactive.
Signal value:
Valve override control value
The module has this output socket if the 3-way valve (mixing valve) option or the 2-way valve option is selected for the
type
Outputs the value used to override the cooling distribution circuit's valve if the override is active
Signal value:
Status Valve purge
The module has this output socket if the 3-way valve (mixing valve) option or the 2-way valve option is selected for the
type
Outputs the status as to whether the cooling distribution circuit controller is actually undertaking a valve purge. This value is
received from the cooling distribution circuit controller linked via the related module group object.
Signal value:
Pump A operating status (Off/On)
The module has this output socket if the Yes option is selected for the
Outputs the operating status (Off/On) provided by the pump. On pumps with their own control, this operating status can differ
from the operating status of the cooling distribution circuit controller.
Signal value:
Pump A relay status
Outputs the status of the pump from the cooling distribution circuit controller.
Signal value:
parameter and the Yes option is selected for the
0 = Disabled
1 = Enabled
parameter and the Yes option is selected for the
0...100 %
parameter and the Yes option is selected for the
0 = Inactive
1 = Active
0 = Inactive
1 = Active
0 = Off
1 = On
Valve override disable/enable
parameter.
Valve override disable/enable
parameter.
Status Valve purge
parameter.
Pump display operating status
AC/S 1.x.1 | 2CDC508198D0211 Rev. A 351
Data type
DPT 1.003
Valve
DPT 5.001
Valve
DPT 1.011
Valve
DPT 1.011
parameter.
DPT 1.001
Advertisement
Table of Contents
