ABB i-bus KNX AC/S 1.x.1 Series Product Manual page 100

®
ABB i-bus KNX
Parameters
Gate (GATE)
Disables or enables the transmission of values.
If the gate element is disabled, the output remains unchanged and there is no recalculation.
Inputs
No. DPT
1
2
Outputs
No. DPT
1
Parameters
Name
Control input triggers
calculation
Function
Control input = 1 (true): The output sends every time an input value is received (enabled)
Control input = 0 (false): The output does not send (disabled)
Other
If the control input is not connected, the transmission of values through the gate element is enabled.
100 2CDC508198D0211 Rev. A | AC/S 1.x.1
Abbr. Name
Any E Input
1 bit I Control input
Abbr. Name
Any A Output
Value
Yes
No
Invertible Visible
No Always
Yes Always
Invertible Visible
No Always
Visible Description
Yes: The output sends a value every time a
Always
value is received on the control input.
Description
Disables/enables the output
Description