Table of Contents
Advertisement
®
ABB i-bus
KNX
Parameters
Valve
Settings for the cooling distribution circuit valve.
Valve type
Options:
Setting for the valve type used in the cooling distribution circuit. This parameter affects the depiction on the
web user interface.
Selection of 3-way valve (mixing valve) or 2-way valve option:
3-way valve (mixing valve)
2-way valve
None
Dependent parameter(s)
Status Valve purge
Options:
No (checkbox cleared)
Yes (checkbox selected)
If this function is activated, the status of the valve purge can be received by a group object and
output on the web user interface, in a BACnet object and on the ASM socket.
Valve override disable/enable
Options:
No (checkbox cleared)
Yes (checkbox selected)
If this function is activated, the valve can be overridden via the web user interface. For this purpose
additional group objects are displayed that must be connected to the cooling distribution circuit
controller.
AC/S 1.x.1 | 2CDC508198D0211 Rev. A 347
Advertisement
Table of Contents
