ABB i-bus KNX AC/S 1.x.1 Series Product Manual page 371

®
ABB i-bus KNX
Parameters
This section displays the valve position from the cooling distribution circuit controller linked via KNX. It is
also indicated whether a valve purge is in progress.
If activated in the settings, the valve position can be overridden by the "admin" and "expert" users via the
web user interface. For this purpose the slider must be dragged to the "Override" position. The status sent
by the cooling distribution circuit controller continues to be displayed in "Auto" during the override.
AC/S 1.x.1 | 2CDC508198D0211 Rev. A 371