®
ABB i-bus
KNX
Parameters
7.13.4
Group objects
Object function
Output: Operating type
Output: Heating
Output: Cooling
Object function
Output: Operating type
Outputs the active operating type. The value is sent on every change and then repeated every 30 minutes. The cycle time
cannot be changed.
Telegram value:
Output: Heating
Outputs the state of the heating operating type. The value is sent on every change and then repeated every 30 minutes. The
cycle time cannot be changed.
Telegram value:
Output: Cooling
Outputs the state of the heating operating type. The value is sent on every change and then repeated every 30 minutes. The
cycle time cannot be changed.
Telegram value:
Name (can be
changed separately)
Heating/cooling
changeover
Heating/cooling
changeover
Heating/cooling
changeover
Name (can be changed separately)
Heating/cooling changeover
0 = Cooling
1 = Heating
Heating/cooling changeover
0 = Off
1 = On
Heating/cooling changeover
0 = Off
1 = On
Data point
Length
type (DPT)
1.100
1 bit
1.001
1 bit
1.001
1 bit
Data type
1 bit
DPT 1.100
1 bit
DPT 1.001
1 bit
DPT 1.001
AC/S 1.x.1 | 2CDC508198D0211 Rev. A 407
Flags
C
R
W T
U
I
x
x
x
x
x
x
x
x
x
Flags
C, R, T
C, R, T
C, R, T