ABB i-bus KNX AC/S 1.x.1 Series Product Manual page 111

®
ABB i-bus KNX
Parameters
Calendar, simple (CALENDAR_S)
Simple comparison of a start time and an end time.
Triggers daily events (for the whole day or at specific times).
The output value is 1 if the device time is between Start and End and the other conditions are met.
Inputs
No.
1
2
3
4
Outputs
No.
1
Parameters
Name
Start
End
Active
Whole time
* As input = if yes: parameter is input.
DPT Abbr.
Time S
Time E
1 bit A
1 bit GT
DPT Abbr. Name
1 bit A Output
Value
Time (hh:mm:ss)
Default = 00:00:00
Time (hh:mm:ss)
Default = 00:00:00
Checkbox
Checkbox
Name Visible
Start Parametrizable
End Parametrizable
Active Parametrizable
Whole time Parametrizable
Visible
Always
Visible
Always
Always
Always
Always
AC/S 1.x.1 | 2CDC508198D0211 Rev. A 111
Description
Value 0 disables the
element, the output
remains unchanged
Output is always 1
Description
As input*
Yes
Yes
Yes
Yes