Table of Contents
Advertisement
®
ABB i-bus
KNX
Parameters
Object function
Input: Supply temperature
Input for supply temperature measured in the heat generator.
Telegram value:
Input: Return temperature
Input for return temperature measured in the heat generator.
Telegram value:
Output: Supply setpoint temperature
Outputs the supply setpoint temperature calculated by the module as the value specified to the heat generator.
Telegram value:
Input: Pump relay status
The module has this group object if the Yes option is selected for the
Input for the status of the heat generator's pump.
Telegram value:
Output: Heat generator On/Off
The module has this group object in the following conditions:
•
If the Yes option is selected for the
heat generator based on ASM input socket
•
If the Yes option is selected for the
Output for switching on/off the heat generator.
Telegram value:
Name (can be changed separately)
Heat generator
-273...670760 °C
Heat generator
-273...670760 °C
Heat generator
-273...670760 °C
Heat generator
0 = Off
1 = On
Heat generator
Supply temperature control
parameter.
Switch off if no room demand
0 = Off
1 = On
Data type
2 bytes
DPT 9.001
2 bytes
DPT 9.001
2 bytes
DPT 9.001
1 bit
DPT 1.001
Pump
parameter.
1 bit
DPT 1.001
parameter and the Yes option is selected for the
parameter.
AC/S 1.x.1 | 2CDC508198D0211 Rev. A 319
Flags
C, W, T
C, W, T
C, R, T
C, W, T
C, R, T
Enable
Advertisement
Table of Contents
