ABB i-bus KNX AC/S 1.x.1 Series Product Manual page 385

®
ABB i-bus KNX
Parameters
Output sockets
Object name
Supply temperature
Outputs the current supply temperature that is received via the related group object.
Signal value:
Return temperature
Outputs the current return temperature that is received via the related group object.
Signal value:
Chiller On/Off
The module has this output socket in the following conditions:
•
If the Yes option is selected for the
chiller based on ASM input socket
•
If the Yes option is selected for the
Outputs the on/off status of the chiller that is sent to the chiller via the related group object. The state is dependent on the
Enable chiller based on ASM input socket and Switch off if no room demand parameters.
Signal value:
Pump operating status (Off/On)
The module has this output socket if the Yes option is selected for the
Outputs the operating status (Off/On) provided by the pump. On pumps with their own control, this operating status can differ
from the operating status of the chiller.
Signal value:
Pump relay status
Outputs the status of the pump from the chiller.
Signal value:
-273...670760 °C
-273...670760 °C
Supply temperature control
parameter.
Switch off if no room demand
0 = Off
1 = On
0 = Inactive
1 = Active
0 = Off
1 = On
Data type
DPT 9.001
DPT 9.001
DPT 1.001
parameter and the Yes option is selected for the
parameter.
DPT 1.011
Pump display operating status
DPT 1.001
AC/S 1.x.1 | 2CDC508198D0211 Rev. A 385
Enable
parameter.