ABB i-bus KNX AC/S 1.x.1 Series Product Manual page 131

®
ABB i-bus KNX
Parameters
Constant (CONST)
The constant can be used, for example, for the purposes of comparison with other input variables. The
constant never triggers a recalculation.
Outputs
No. DPT
1
Parameters
Name
Constant
value
Abbr.
Any O
Value
According to DPT Always
Name Visible
Output Always
Visible Description
For entering a constant value
Selecting the checkbox sets the initial value to 1, but
only with 1-bit values. Clearing the checkbox sets a
value of 0.
Description
AC/S 1.x.1 | 2CDC508198D0211 Rev. A 131