Heating/Cooling Changeover Asm; General; Settings - ABB i-bus KNX AC/S 1.x.1 Series Product Manual

®
ABB i-bus KNX
Parameters
7.13

Heating/cooling changeover ASM

7.13.1

General

This application-specific automation module (ASM) selects the heating or cooling operating type currently
required for a system with heating and cooling functions. Depending on the setting made, the operating
type is calculated based on the outside temperature or on the supply temperature. The module outputs the
current operating type on the KNX bus, on the ASM output socket and on BACnet.
7.13.2

Settings

General
You will find descriptions of the global settings (Name, Description, Reinstall, BACnet, WebUI) in
7.3, Global ASM settings.
AC/S 1.x.1 | 2CDC508198D0211 Rev. A 403
chapter