ABB i-bus KNX AC/S 1.x.1 Series Product Manual page 210

®
ABB i-bus KNX
Parameters
Object function
Input: Presence (slave)
The module has this group object if the Yes option is selected for the
Input for the connection of the presence status, e.g. from a presence detector.
Telegram value:
Input: Rel. humidity
The module has this group object if the Yes option is selected for the
Input for the connection of the relative humidity from the sensor.
Telegram value:
Input: CO2 value
The module has this group object if the Yes option is selected for the
Input for the connection of the CO
Telegram value:
Input: Fan coil unit, valve heating
The module has this group object if the 2-pipe heating option or the 4-pipe heating + cooling option is selected for the
unit parameter.
Input for the valve position (control value) on the fan coil unit for heating.
Telegram value:
210 2CDC508198D0211 Rev. A | AC/S 1.x.1
Name (can be changed
separately)
Room
0 = Not occupied
1 = Occupied
Room
0...100%
Room
value from the air quality sensor.
2
0...670760
Room
0...100%
Data type
1 bit
DPT 1.018
Presence detector parameter.
1 byte
DPT 5.001
Rel. humidity parameter.
2 bytes
DPT 9.008
CO2 value parameter.
1 byte
DPT 5.001
Flags
C, W, T, U
C, W, T, U
C, W, T, U
C, W, T, U
Fan coil