Table of Contents
Advertisement
®
ABB i-bus
KNX
Parameters
Object name
Heat generator: Control On/Off override disable/enable
The module has this BACnet output object in the following conditions:
•
If the Yes option is selected for the
heat generator based on ASM input socket
•
If the Yes option is selected for the
Outputs whether heat generator on/off has been overridden via the web user interface.
Signal value:
Heat generator: Heat generator operating status
The module has this BACnet output object if the Yes option is selected for the
Outputs the operating status (Off/On) provided by the heat generator. Due to the control integrated into the heat generator,
this status may differ from the operating status specified by this module.
Signal value:
Heat generator: Heat generator failure status
The module has this BACnet output object if the Yes option is selected for the
Outputs the fault status provided by the heat generator.
Signal value:
Heat generator: Room control values
The module has this BACnet output object in the following conditions:
•
If the Yes option is selected for the
selected for the
parameter.
•
If the Yes option is selected for the
Outputs the highest room setpoint temperature that is present on the ASM input socket and that is used by the Economy mode
and Switch off if no room demand functions.
Signal value:
Supply temperature control
parameter.
Switch off if no room demand
0 = Not overridden
1 = Overridden
0 = Off
1 = On
0 = Off
1 = On
Supply temperature control
Supply setpoint temperature source
Switch off if no room demand
0...100 %
Object type
Binary value
parameter and the Yes option is selected for the
parameter.
Binary value
Show operating status
Binary value
Show fault status
Analog value
parameter, the Calculated weather compensated option is
parameter and the Yes option is selected for the
parameter.
AC/S 1.x.1 | 2CDC508198D0211 Rev. A 327
Unit
COV send
condition
-
-
Enable
-
-
parameter.
-
-
parameter.
% (98)
1.0
Room involvement
Advertisement
Table of Contents
