Control Register (Crc_Cr); Crc Register Map; Table 6. Crc Calculation Unit Register Map And Reset Values - ST STM32F205 series Reference Manual

Advanced arm-based 32-bit mcus

Hide thumbs Also See for STM32F205 series:

Table of Contents

Bits 31:8 Reserved, must be kept at reset value.

Bits 7:0 General-purpose 8-bit data register bits

Can be used as a temporary storage location for one byte.

This register is not affected by CRC resets generated by the RESET bit in the CRC_CR

Control register (CRC_CR)

Address offset: 0x08

Reset value: 0x0000 0000

Bits 31:1 Reserved, must be kept at reset value.

Bit 0 RESET bit

Resets the CRC calculation unit and sets the data register to 0xFFFF FFFF.

This bit can only be set, it is automatically cleared by hardware.

The following table provides the CRC register map and reset values.

Data register

RM0033 Rev 8

CRC calculation unit

Independent data register

Do you have a question about the STM32F205 series and is the answer not in the manual?