Table 57. Output Control Bits For Complementary Ocx And Ocxn Channels With; Break Feature - ST STM32F205 series Reference Manual

Advanced arm-based 32-bit mcus
Hide thumbs Also See for STM32F205 series:
Table of Contents

Advertisement

Advanced-control timers (TIM1 and TIM8)

Table 57. Output control bits for complementary OCx and OCxN channels with

Control bits
MOE
OSSI
OSSR
bit
bit
bit
0
0
0
0
1
X
1
1
1
1
0
0
X
1
1. When both outputs of a channel are not used (CCxE = CCxNE = 0), the OISx, OISxN, CCxP and CCxNP bits must be kept
cleared.
Note:
The state of the external I/O pins connected to the complementary OCx and OCxN channels
depends on the OCx and OCxN channel state and the GPIO registers.
366/1378

break feature

CCxE
CCxNE
bit
bit
Output Disabled (not driven by
0
0
the timer), OCx=0, OCx_EN=0
Output Disabled (not driven by
0
1
the timer), OCx=0, OCx_EN=0
OCxREF + Polarity
1
0
OCx=OCxREF xor CCxP,
OCx_EN=1
OCREF + Polarity + dead-time
1
1
OCx_EN=1
Output Disabled (not driven by
0
0
the timer)
OCx=CCxP, OCx_EN=0
Off-State (output enabled with
0
1
inactive state)
OCx=CCxP, OCx_EN=1
OCxREF + Polarity
1
0
OCx=OCxREF xor CCxP,
OCx_EN=1
OCREF + Polarity + dead-time
1
1
OCx_EN=1
X
X
Output disabled (not driven by the timer anymore). The output state is
defined by the GPIO controller and can be High, Low or Hi-Z.
0
0
0
1
Off-State (output enabled with inactive state)
Asynchronously: OCx=CCxP, OCx_EN=1, OCxN=CCxNP,
1
0
OCxN_EN=1
Then if the clock is present: OCx=OISx and OCxN=OISxN after a
1
1
dead-time, assuming that OISx and OISxN do not correspond to OCX
and OCxN both in active state
Output states
OCx output state
RM0033 Rev 8
(1)
OCxN output state
Output Disabled (not driven by the
timer), OCxN=0, OCxN_EN=0
OCxREF + Polarity OCxN=OCxREF
xor CCxNP, OCxN_EN=1
Output Disabled (not driven by the
timer)
OCxN=0, OCxN_EN=0
Complementary to OCREF (not
OCREF) + Polarity + dead-time
OCxN_EN=1
Output Disabled (not driven by the
timer)
OCxN=CCxNP, OCxN_EN=0
OCxREF + Polarity
OCxN=OCxREF xor CCxNP,
OCxN_EN=1
Off-State (output enabled with
inactive state)
OCxN=CCxNP, OCxN_EN=1
Complementary to OCREF (not
OCREF) + Polarity + dead-time
OCxN_EN=1
RM0033

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the STM32F205 series and is the answer not in the manual?

Questions and answers

This manual is also suitable for:

Stm32f207 seriesStm32f215 seriesStm32f217 series

Table of Contents