Gateway-List - 3Com 8807 Command Reference Manual

DHCP Server Configuration Commands 843
hour hour: Specifies the number of hours. The hour argument ranges from 0 to
23.
minute minute: Specifies the number of minutes. The minute argument ranges
from 0 to 59.
unlimited: Specifies an unlimited lease time.
Description
Use the expired command to set the valid period for a global DHCP address pool.
Use the undo expired command to revert to the default valid period.
The default valid period is 1 day.
Related command: dhcp server ip-pool, dhcp server expired.
Example
# Set the IP address lease time of the global DHCP address pool 0 to one day plus
two hours and three minutes.
<SW8800> system-view
System View: return to User View with Ctrl+Z.
[SW8800] dhcp server ip-pool 0
[3Com-dhcp-0] expired day 1 hour 2 minute 3

gateway-list

Syntax
gateway-list ip-address [ ip-address ]
undo gateway-list { ip-address | all }
View
DHCP address pool view
Parameter
ip-address: IP address of an outbound gateway. You can specify up to eight IP
addresses (separated by spaces) in one command.
all: Specifies all outbound gateway IP addresses.
Description
Use the gateway-list command to configure one or more outbound gateway
addresses for DHCP clients.
Use the undo gateway-list command to remove one or all outbound gateway
addresses configured for DHCP clients.
By default, no outbound gateway address is configured for DHCP clients.
With eight outbound gateway addresses already configured, if you add a new
outbound gateway address by executing the gateway-list command, the new
one overwrites the oldest one.