Dhcp-Server Ip; Display Dhcp-Security - 3Com Switch 4500 Family Manual

Related commands: dhcp server, display dhcp-server.
Examples
# Enter system view
<Sysname> system-view
System View: return to User View with Ctrl+Z.
# Enable the unauthorized-DHCP server detection function on the DHCP relay agent.
[Sysname] dhcp-server detect

dhcp-server ip

Syntax
dhcp-server groupNo ip ip-address&<1-8>
undo dhcp-server groupNo
View
System view
Parameters
groupNo: DHCP server group number, ranging from 0 to 19.
ip-address&<1-8>: IP address of the DHCP server. &<1-8> indicates that up to eight IP addresses can
be input, with any two IP addresses separated by a space.
Description
Use the dhcp-server ip command to configure the DHCP server IP address(es) in a specified DHCP
server group.
Use the undo dhcp-server command to remove all DHCP server IP addresses in a DHCP server
group.
Related commands: dhcp-server, display dhcp-server.
Examples
# Enter system view.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
# Configure three DHCP server IP addresses 1.1.1.1, 2.2.2.2, and 3.3.3.3 for DHCP server group 1, so
that this group contains three DHCP servers (server 1, server 2 and server 3).
[Sysname] dhcp-server 1 ip 1.1.1.1 2.2.2.2 3.3.3.3

display dhcp-security

Syntax
display dhcp-security [ ip-address | dynamic | static | tracker ]
View
Any view
1-7