Display Dhcp Server Ip-In-Use - 3Com 5500-EI PWR Reference Manual

display dhcp server ip-in-use

Syntax
display dhcp server ip-in-use { ip ip-address | pool [ pool-name ] | interface [ interface-type
interface-number ] | all }
View
Any view
Parameters
ip ip-address: Specifies an IP address.
pool [ pool-name ]: Specifies a global address pool. The pool-name argument, a string of 1 to 35
characters, is the name of an address pool. If you do not provide this argument, this command applies
to all global address pools.
interface [ interface-type interface-number ]: Specifies a VLAN interface. If you do not specify a VLAN
interface, this command applies to all VLAN interfaces.
all: Specifies all address pools.
Description
Use the display dhcp server ip-in-use command to display the address binding information of one IP
address, the specified DHCP address pool(s) or all DHCP address pools.
Related commands: reset dhcp server ip-in-use.
Examples
# Display the address binding information of all DHCP address pools.
<Sysname> display dhcp server ip-in-use all
Global pool:
IP address
Interface pool:
IP address
192.168.3.2
--- total 1 entry ---
Client-identifier/
Hardware address
Client-identifier/
Hardware address
3030-6530-2d66-6331-
342d-3030-3062-566c-
616e-2d69-6e74-6572-
6661-6365-3130-30
Lease expiration
Lease expiration
Apr 6 2000 00:52:06 AM Auto:COMMITTED
1-26
Type
Type