Table of Contents
Advertisement
Commissioning
7.7 Replacing parameter lists and alarm lists
3. Right-click in field "Xml File containing message texts".
4. Select the shortcut menu command "Select".
5. Navigate to directory
"C:\ProgramData\Siemens\DriveSystemConnect\config\SinamicsBase\GM150"
6. Select the alarm list that matches your firmware.
7. Click on "Open".
8. Select menu command "File > Save".
9. Restart the service "Drive System Connect" (Page 34).
7.7.3
Restart service "Drive System Connect"
1. Open application "Drive System Connect Diagnose".
2. Select menu command "Tools > Start / Stop service".
34
SINAMICS CONNECT 500
Operating Instructions, 06/2023
Advertisement
Table of Contents
