Asset Info (Motor Monitoring) - Step 7/7 - Siemens SIMOTICS CONNECT 400 Operating Instructions Manual

Commissioning
6.2 Commissioning with Android
Note
Service factor and cooling method
• Service factor according to NEMA MG-1 (if applicable)
• Cooling method according to IEC60034-6
2. Check the data entered and confirm with the "Send" button.
3. Continue to commission the equipment.
6.2.4.8

Asset Info (Motor Monitoring) - Step 7/7

Note
Settings cannot be modified subsequently
Select the following settings carefully. There is no way of modifying the settings after selection.
If you choose an incorrect setting, repeat the onboarding process.
62
SIMOTICS CONNECT 400
Operating Instructions, 04/2023, A5E50161952B AL