Operating Procedure - YASKAWA SGD7C-***AMAA*** Product Manual

5.16 Resetting the Absolute Encoder

5.16.3 Operating Procedure

5.16.3 Operating Procedure

Use the following procedure to reset the absolute encoder.
1.
Confirm that the servo is OFF.
2.
Click the
maWin+.
3.
Select Absolute Encoder Reset in the Menu Dialog Box.
The Absolute Encoder Warning Dialog Box will be displayed.
4.
Click the Continue Button.
Click the Cancel Button to cancel resetting the absolute encoder. The Main Window will return.
5.
Click the Execute setting Button.
The current alarm code and name will be displayed in the Alarm name Box.
6.
Click the Continue Button.
Click the Cancel Button to cancel resetting the absolute encoder. The previous dialog box will return.
5-44
Servo Drive Button in the workspace of the Main Window of the Sig-