YASKAWA SGD7C-***AMAA*** Product Manual page 584

12.1 Data Logging
12.1.1 Operating Procedure
Information
12-10
No. Item
Select one of the following operators.
Condition
11
If both Condition A and Condition B are specified, select one of the follow-
ing conditions.
Compound condi-
12
tion
To automatically start logging when the power supply is turned ON, set the Start trig-
Example
ger to the following condition.
• When the Saving destination is set to USB memory:
Setting example: Start trigger SB006540 = ON
Note: The SB006540 register turns ON when a USB memory device is detected.
• When the Saving destination is set to In the built-in RAM disc:
Setting example: Start trigger SB000001 or SB000003 = ON
Note: The SB000001 register turns ON during the first scan of the high-speed scan.
The SB000003 register turns ON during the first scan of the low-speed scan.
In the following example, the output conditions are set to log only the data in the
Example
shaded region.
Setting example: Condition A > = Upper limit, Condition B < = Lower limit, Compound
condition = OR
Upper limit
Lower limit
Click the Cancel Button to return to the Logging 1 Dialog Box without registering the
settings.
Description
Selection
Condition is met when the left register value is greater
>
than the right register value.
Condition is met when the left register value is less
<
than the right register value.
Condition is met when the left register value is equal
=
to the right register value.
Condition is met when the left register value is not
<>
equal to the right register value.
Condition is met when the left register value is greater
>=
than or equal to the right register value.
Condition is met when the left register value is less
<=
than or equal to the right register value.
Selection
No com-
The compound condition is met when Condition A is
pound
met. Condition B will be ignored, even if it is specified.
condition
The compound condition is met when both condition A
AND
and condition B are met.
The compound condition is met when either condition
OR
A or condition B is met.
Continued from previous page.
Description
Description
Logged data
Logged data