YASKAWA SGD7C-***AMAA*** Product Manual page 367

7.6 Debugging Ladder Programs
7.6.2 Register List Panes
 Number of registers displayed in one row
You can set the number of registers displayed in a row to between 1 and 16 either by direct
numeric input or by selection from a list. For bit registers, the number is always 16 and cannot
be changed. If you select Auto, the number of displayed registers will be set automatically
based on the size of the Register List Pane.
 Monitor ON (
This button is enabled only in Online Mode. Click this button to turn monitoring ON and OFF.
When monitoring is ON, the register data will be updated and displayed continuously. When
monitoring is OFF, the data will not be updated.
 Register Map Show (
Click this button to show and hide the background colors of the register map.
 Register Map Refresh Button ( )
Click this button to refresh the values in the register map.
Information
 Redundant Register Search Button ( /
This button searches for and displays redundant registers. The ↑ Button searches for redun-
dant registers upward, and the ↓ Button searches downward.
The results will be displayed on the register map. If a redundant register was found, it will be
displayed with a blue background.
Information
Editing Data
You can perform the following editing operations by selecting cells on the register map.
• Directly entering data
• Deleting data (setting the data to 0)
• Copying and pasting data
If the SERVOPACK is online, any changes in the data immediately affect the operation of the
SERVOPACK.
7-58
)/OFF (
)/Hide (
This button is disabled when the Register Map Show/Hide Button is in Hide (
This button is disabled when the Register Map Show/Hide Button is in Hide (
) Button
) Button
)
) status.
) status.