Saving To Flash Memory - YASKAWA SGD7C-***AMAA*** Product Manual

7.5 Transferring Data with the MPE720

7.5.5 Saving to Flash Memory

3.
Click the Batch Button or the Individual Button, and then the Start Button.
If you click the Batch Button, use the check boxes to indicate the data to transfer: System Configu-
ration, Program, Register, and/or Comment.
If you click the Individual Button, use the check boxes to indicate the data to transfer: System Con-
figuration, Program, Register, and/or Comment. You can then specify the individual data to transfer.
7.5.5

Saving to Flash Memory

You can save the SERVOPACK RAM data to the flash memory of the SERVOPACK.
Important
Use the following procedure to save the data.
Select Online − Save to Flash from the menu bar.
1.
The Transfer Program − Save to Flash Dialog Box will be displayed.
2.
Click the Start Button.
If the CPU Unit is running, the following message will be displayed. Click either the Yes or the No But-
ton to save the data to the flash memory.
7-54
You can save the data to flash memory only when the SERVOPACK is online.