YASKAWA SGD7C-***AMAA*** Product Manual page 572

11.1 List of Servo Parameters
11.1.2 List of Servo Parameters
Parameter
No.
Pn868
Pn869
Pn86A
Pn882
11-40
Name
Output Signal Monitor
2
Allocations 1
Output Signal Monitor Allocation for CN1-23 and CN1-24
0 Allocate bit 24 (IO_STS1) to CN1-23/CN1-24 output signal monitor.
1 Allocate bit 25 (IO_STS2) to CN1-23/CN1-24 output signal monitor.
2 Allocate bit 26 (IO_STS3) to CN1-23/CN1-24 output signal monitor.

n. X 3 Allocate bit 27 (IO_STS4) to CN1-23/CN1-24 output signal monitor.
4 Allocate bit 28 (IO_STS5) to CN1-23/CN1-24 output signal monitor.
5 Allocate bit 29 (IO_STS6) to CN1-23/CN1-24 output signal monitor.
6 Allocate bit 30 (IO_STS7) to CN1-23/CN1-24 output signal monitor.
7 Allocate bit 31 (IO_STS8) to CN1-23/CN1-24 output signal monitor.
CN1-23/CN1-24 Output Signal Monitor Enable/Disable Selection
 
n. X 0 Disable allocation for CN1-23/CN1-24 output signal monitor.
1 Enable allocation for CN1-23/CN1-24 output signal monitor.
Output Signal Monitor Allocation for CN1-25 and CN1-26
 
n. X
0 to 7 The settings are the same as the CN1-23/CN1-24 allocations.
CN1-25/CN1-26 Output Signal Monitor Enable/Disable Selection

n.X 0 Disable allocation for CN1-25/CN1-26 output signal monitor.
1 Enable allocation for CN1-25/CN1-26 output signal monitor.
Output Signal Monitor
2
Allocations 2
Output Signal Monitor Allocation for CN1-27 and CN1-28

n. X
0 to 7 The settings are the same as the CN1-23/CN1-24 allocations.
CN1-27/CN1-28 Output Signal Monitor Enable/Disable Selection
 
n. X 0 Disable allocation for CN1-27/CN1-28 output signal monitor.
1 Enable allocation for CN1-27/CN1-28 output signal monitor.
Output Signal Monitor Allocation for CN1-29 and CN1-30
 
n. X
0 to 7 The settings are the same as the CN1-23/CN1-24 allocations.
CN1-29/CN1-30 Output Signal Monitor Enable/Disable Selection

n.X 0 Disable allocation for CN1-29/CN1-30 output signal monitor.
1 Enable allocation for CN1-29/CN1-30 output signal monitor.
Output Signal Monitor
2
Allocations 3
Output Signal Monitor Allocation for CN1-31 and CN1-32

n. X
0 to 7 The settings are the same as the CN1-23/CN1-24 allocations.
CN1-31/CN1-32 Output Signal Monitor Enable/Disable Selection
 
n. X 0 Disable allocation for CN1-31/CN1-32 output signal monitor.
1 Enable allocation for CN1-31/CN1-32 output signal monitor.
 
n. X Reserved parameter (Do not change.)

n.X Reserved parameter (Do not change.)
Reserved parameter (Do
2
not change.)
Setting Setting Default
Range Unit Setting
0000h to
– 0000h
1717h
0000h to
– 0000h
1717h
0000h to
– 0000h
1717h
– – –
Continued from previous page.
Applicable When Classi-
Motors Enabled fication
Immedi-
All Setup
ately
Immedi-
All Setup
ately
Immedi-
All Setup
ately
– – –
Continued on next page.
Refer-
ence
*1
*1
*1
–