Trial Operation With The Svd - YASKAWA SGD7C-***AMAA*** Product Manual

6.4

Trial Operation with the SVD

This section gives an example of trial operation with the SVD Function Module in the Controller
Section.
Refer to the following manual for details on the SVD.
Σ-7-Series Σ-7C SERVOPACK Motion Control User's Manual (Manual No.: SIEP S800002 03)
1.
Confirm that the wiring is correct, and then connect the I/O signal connector (CN1 con-
nector).
Refer to the following chapter for details on wiring.
Chapter 3 Wiring and Connections
2.
Turn ON the power supplies to the SERVOPACK.
If control power is being supplied correctly, the PWR indicator on the SERVOPACK will light.
If main circuit power is being supplied correctly, the CHARGE indicator on the SERVOPACK will light.
3.
Place the SERVOPACK and the MPE720 online, and open the Module Configuration
Definition Tab Page.
4.
Double-click the axis for which to preform trial operation.
The Function List Dialog Box will be displayed.

6.4 Trial Operation with the SVD

6
6-9