4.3 Self Configuration
4.3.3 Confirming the Detailed Definitions of the Function Modules
SIZE
Set the input and output sizes in words.
These settings are disabled if the profile is set to Standard Servo.
• Setting range: 0 to 32
SCAN
Sets the scan in which the input or output is performed.
This setting is always set to High if the profile is set to Standard Servo.
• Settings: High or Low
Station Name (comment)
Enter a comment of up to 32 characters if required.
Deleting Station Assignments
You can delete the items on the Link Assignment Tab Page for a station.
Click any cell in the row for the station to delete, and then select Edit − Assignment Delete
from the menu bar.
Important
Motion Control Function Modules
Use the following procedure to display the SVD Definition Tab Page.
1.
Double-click the axis to monitor on the Module Configuration Definition Tab Page.
The Function List Dialog Box will be displayed.
4-38
Deleted station assignments cannot be restored.