Table of Contents
Advertisement
M-EXECUTOR Function Module Detail Settings
The detailed settings for the M-EXECUTOR Function Module are performed on the Module
Configuration Definition Tab Page and the Detail Dialog Box.
This section provides the procedures to display this tab page and dialog box, and describes
their contents.
Module Configuration Definition Tab Page
Use the following procedure to display the Module Configuration Definition Tab Page.
• Click the Module Configuration Button from the Start Tab Page.
The information on the M-EXECUTOR Function Module is displayed in the M-EXECUTOR cell
of the Function Module/Slave Column.
The following table describes the items that are displayed on the Module Configuration Defini-
tion Tab Page.
No.
Item
Function Module/Slave
Status
Circuit No./Axis Address
Motion Registers
12.9 The M-EXECUTOR Function Module
Display/Setting Item
Displays whether the M-EXECUTOR Function Mod-
ule is enabled.
• UNDEFINED: Disabled
• M-EXECUTOR: Enabled
Displays the status of the M-EXECUTOR Function
Module.
Not used.
"−−−−" is always displayed.
Not used.
"−−−−" is always displayed.
Editing
Possible
Possible
Not possible
Not possible
Continued on next page.
12
12-69
Advertisement
Table of Contents
Troubleshooting
