Table of Contents
Advertisement
11.1 List of Servo Parameters
11.1.2 List of Servo Parameters
Parameter
No.
Pn512
Pn514
11-22
Name
Output Signal Inverse
2
Settings
Output Inversion for CN1-23, CN1-24, CN1-25,
and CN1-26 Terminals (Axis A: CN1-23 and CN1-24, Axis B: CN1-25 and CN1-26)
n.
X
0
The signal is not inverted.
1
The signal is inverted.
Output Inversion for CN1-27, CN1-28, CN1-29, and
CN1-30 Terminals (Axis A: CN1-27 and CN1-28, Axis B: CN1-29 and CN1-30)
n.
X
0
The signal is not inverted.
1
The signal is inverted.
n.
X
Reserved parameter (Do not change.)
n.X
Reserved parameter (Do not change.)
Output Signal Selec-
2
tions 4
n.
X
Reserved parameter (Do not change.)
n.
X
Reserved parameter (Do not change.)
/PM (Preventative Maintenance Output) Signal Allocation
0
Disabled (the above signal output is not used).
Axis A: Output the signal from the CN1-23 or CN1-24 output ter-
minal.
1
Axis B: Output the signal from the CN1-25 or CN1-26 output ter-
n.
X
minal.
Axis A: Output the signal from the CN1-27 or CN1-28 output ter-
minal.
2
Axis B: Output the signal from the CN1-29 or CN1-30 output ter-
minal.
3 to 6
Reserved setting (Do not use.)
n.X
Reserved parameter (Do not change.)
Setting
Setting
Default
Range
Unit
Setting
0000h to
–
0000h
1111h
0000h to
–
0000h
0666h
Continued from previous page.
Applicable
When
Classi-
Motors
Enabled
fication
After
All
Setup
restart
After
All
Setup
restart
Reference
page 9-11
Continued on next page.
Refer-
ence
page
5-53
–
Advertisement
Table of Contents
Troubleshooting
