Write Prohibition Setting For Parameters - YASKAWA SGD7C-***AMAA*** Product Manual

5.1 Manipulating Parameters (Pn)

5.1.4 Write Prohibition Setting for Parameters

6.
Select Edited Parameters in the Write to Servo Group.
The edited parameters are written to the SERVOPACK and the backgrounds of the cells change to
white.
7.
Click the OK Button.
8.
To enable the change to the settings, turn the power supply to the SERVOPACK OFF
and ON again.
This concludes the procedure to set the parameters.
5.1.4

Write Prohibition Setting for Parameters

You can prohibit changes to parameters or prohibit the execution of specific functions. Refer to
the following section for information on the functions that are prohibited.
Restrictions on page 5-10
Important
Preparations
No preparations are required.
5-8
The write prohibition setting for parameters applies to both axes A and B.
If you change the setting, the new setting will be applied to both axes.