Table of Contents
Advertisement
12.5 Maintenance Monitoring
12.5.2 Setting Procedure
The Maintenance Monitor Settings Dialog Box will be displayed.
2.
Set the maintenance monitor data.
Select a group number.
• Maximum number of groups: 32
Select the item to monitor.
Power consumption
per unit time
Accumulated power
consumption
Accumulated power
consumption (after the
decimal point)
SERVOPACK installa-
tion environment
12-32
Monitored
device
Monitor data size
Selection
The power consumption per unit time is dis-
played.
The accumulated power consumption since
operation was started is displayed.
The three digits below the decimal point of the
accumulated power consumption since opera-
tion was started are displayed.
The temperature environment load status in the
SERVOPACK is displayed.
Monitor data unit
First address of system registers to which to output the monitor data
Description
Num-
Monitored
ber of
Device
Words
SERVOPACK
2
SERVOPACK
2
SERVOPACK
2
0.001 Wh
SERVOPACK
1
Continued on next page.
Unit
1 Wh
1 Wh
1%
Advertisement
Table of Contents
Troubleshooting
