Table of Contents
Advertisement
Operating Procedure
Use the following procedure to prohibit or permit writing parameter settings.
1.
Click the
Servo Drive Button in the workspace of the Main Window of the Sig-
maWin+.
2.
Select Write Prohibition Setting in the Menu Dialog Box.
The Write Prohibition Setting Dialog Box will be displayed.
3.
Click the
Button or
0000: Writing is permitted (default setting).
0001: Writing is prohibited.
4.
Click the Setting Button.
5.
Click the OK Button.
The setting will be written to the SERVOPACK.
6.
To enable the new setting, turn the power supply to the SERVOPACK OFF and ON
again.
This concludes the procedure to prohibit or permit writing parameter settings.
5.1.4 Write Prohibition Setting for Parameters
Button for the rightmost digit and set one of the following.
5.1 Manipulating Parameters (Pn)
5
5-9
Advertisement
Table of Contents
Troubleshooting
