YASKAWA SGD7C-***AMAA*** Product Manual page 552

11.1 List of Servo Parameters
11.1.2 List of Servo Parameters
Parameter
No.
Pn510
11-20
Name
Output Signal Selec-
2
tions 3
/NEAR (Near Output) Signal Allocation
0 Disabled (the above signal output is not used).
Axis A: Output the signal from the CN1-23 or CN1-24 output ter-
minal.
1
Axis B: Output the signal from the CN1-25 or CN1-26 output ter-

n. X minal.
Axis A: Output the signal from the CN1-27 or CN1-28 output ter-
minal.
2
Axis B: Output the signal from the CN1-29 or CN1-30 output ter-
minal.
3 to 6 Reserved setting (Do not use.)
 
n. X Reserved parameter (Do not change.)
 
n. X Reserved parameter (Do not change.)

n.X Reserved parameter (Do not change.)
Setting Setting Default
Range Unit Setting
0000h to
– 0000h
0666h
Continued from previous page.
Applicable When Classi-
Motors Enabled fication
After
All Setup
restart
Reference
page 5-62
Continued on next page.
Refer-
ence
–