7.7.6
Searching and Replacing in Project Files
You can search and replace text in the same way as you can for ladder programs. Refer to the
following section for details.
7.6.5 Searching and Replacing in Project Files on page 7-62
7.7.7
Viewing a Motion Subprogram
You can open and view a program that is called with an MSEE instruction.
1.
Select the MSEE instruction for the drawing with the program to view, then select
Debug − Refer to Motion Sub Program from the menu bar.
2.
The called program will be displayed in the Edit Motion Program Tab Page.
7.7.8
Cross Reference Searches
You can search and replace text in the same way as you can for ladder programs. Refer to the
following section for details.
7.6.6 Cross Reference Panes on page 7-64
7.7 Debugging a Motion or a Sequence Program
7.7.6 Searching and Replacing in Project Files
7
7-75