4.3 Self Configuration
4.3.3 Confirming the Detailed Definitions of the Function Modules
ADR
Sets the station address of the slave station.
When the local station is set as a slave station, the address specified on the Transmission
Parameters Tab Page is displayed.
• Setting range: 03h to EFh
ExADR
Sets the individual extended addresses when multi-station modules (multi-slaves) are grouped
together as a single node.
This box is displayed when the Display Expansionist Address Button is clicked, and is hidden
when the Omit Expansionist Address Button is clicked.
• Setting range: 03h to EFh
• Extended Address Setting
Extended addresses are set in succession from extended address 00h.
The following figure shows an example of how to set extended addresses.
VENDOR
Set the vendor name of the device.
• Settings: Yaskawa Electric Co. or ∗∗∗∗ Vendor
4-36
et the extended addre
in
order tarting from 00h: 01h,
02h, etc.