YASKAWA SGD7C-***AMAA*** Product Manual page 166

4.3 Self Configuration
4.3.1 Self Configuration
1.
Click the Module Configuration Button on the My Tool View of the Start Tab Page.
The Module Configuration Definition Tab Page will be displayed.
2.
In the Function Module/Slave Column, select the Modules to configure using self con-
figuration.
3.
Click the specified module Button on the Launcher.
The MC-Configurator Dialog Box will be displayed.
4.
Click the OK Button.
Self configuration will be executed only for the new devices that are detected through MECHA-
TROLINK transmissions.
4-26