YASKAWA SGD7C-***AMAA*** Product Manual page 377

7.6 Debugging Ladder Programs
7.6.8 Forcing Coils ON and OFF
Changing the Forced ON/OFF Status from the Force Coil
List Pane
The Force Coil List Pane lists the ON/OFF status of the forced coils in the ladder program.
You can also change and cancel the ON, OFF, or canceled status of the forced coils in the
entire ladder program.
 Searching for Forced Coils in the Force Coil List Pane
1.
Display the Force Coil List Pane.
Note: You can show and hide the Force Coil List Pane by selecting View − Other Windows − Force Coil List
Select Debug − Force Coil List from the Main Window of the MPE720.
2.
Note: In the above case, all programs will be searched for forced coils. To specify a program for the search,
The search results will be displayed in the Force Coil List Pane.
3.
Select the check boxes for the coils to force ON or OFF.
Information
7-68
from the menu bar.
click the Forced Coil Condition Setting Button (
Box.
1. If you right-click in the Force Coil List Pane, you can use the pop-up menu to select
Check All or Uncheck All to select or clear the selections of the all of the Forcing Check
Boxes.
2. If you select or double-click a search result row in the Force Coil List Pane, you can jump
to the corresponding coil in the ladder program. Alternatively, you can right-click in the list
in the Force Coil List Pane, and select Jump from the pop-up menu. If the program is not
open, it will be opened automatically and the display will jump to the corresponding coil in
the program.
3. If you right-click in the Force Coil List Pane and select Cross Reference from the pop-up
menu, or select Debug − Cross Reference from the menu bar, the register that is set for
the coil will be checked for cross references and the results will be displayed in the Cross
Reference Pane.
4. If you edit the ladder program while the search results are displayed, the coils in the edited
program will be displayed in gray.
) to display the Forced Coil Condition Setting Dialog