Writing Into A Project File - YASKAWA SGD7C-***AMAA*** Product Manual

7.5 Transferring Data with the MPE720

7.5.2 Writing into a Project File

7.5.2

Writing into a Project File

You can write the data from the currently open project file to another project file.
Important
Use the following procedure to write the data.
Select Online − Transfer from the menu bar, and then click the Write to Project Button
1.
in the Transfer Dialog Box.
The Open Project Dialog Box will be displayed.
2.
Select the project file to which to write the data, and then click the Save Button.
The Transfer Program - Write into Project Dialog Box will be displayed.
3.
Click the Batch Button or the Individual Button.
If you click the Batch Button, use the check boxes to indicate the data to transfer: System Configu-
ration, Program, Register, and/or Comment.
If you click the Individual Button, use the check boxes to indicate the data to transfer: System Con-
figuration, Program, Register, and/or Comment. You can then specify the individual data to transfer.
4.
Click the Start Button to start writing to the project file.
7-52
You can write to a project file only when the SERVOPACK is offline.