YASKAWA SGD7C-***AMAA*** Product Manual page 17

 Do not hold onto the front cover or connectors when you move a SERVOPACK.
There is a risk of the SERVOPACK falling.
 The SERVOPACK or Servomotor is a precision device. Do not drop it or subject it to strong
shock.
There is a risk of failure or damage.
 Do not subject connectors to shock.
There is a risk of faulty connections or damage.
 Never subject the SERVOPACK to an atmosphere containing halogen (fluorine, chlorine, bro-
mine, or iodine) during transportation.
There is a risk of failure or damage.
 If disinfectants or insecticides must be used to treat packing materials such as wooden frames,
pallets, or plywood, the packing materials must be treated before the SERVOPACK is packaged,
and methods other than fumigation must be used.
Example: Heat treatment, where materials are kiln-dried to a core temperature of 56°C
for 30 minutes or more.
If the electronic products, which include stand-alone products and products installed in machines,
are packed with fumigated wooden materials, the electrical components may be greatly damaged
by the gases or fumes resulting from the fumigation process. In particular, disinfectants containing
halogen, which includes chlorine, fluorine, bromine, or iodine can contribute to the erosion of the
capacitors.
 Do not overtighten the eyebolts on a SERVOPACK or Servomotor.
If you use a tool to overtighten the eyebolts, the tapped holes may be damaged.
 Installation Precautions
 Install the SERVOPACK or Servomotor in a way that will support the mass given in technical
documents.
 Install SERVOPACKs, Servomotors, regenerative resistors, and External Dynamic Brake Resis-
tors on nonflammable materials.
Installation directly onto or near flammable materials may result in fire.
 Provide the specified clearances between the SERVOPACK and the control panel as well as
with other devices.
There is a risk of fire or failure.
 Install the SERVOPACK in the specified orientation.
There is a risk of fire or failure.
 Do not step on or place a heavy object on the SERVOPACK.
There is a risk of failure, damage, or injury.
 Do not allow any foreign matter to enter the SERVOPACK or Servomotor.
There is a risk of failure or fire.
NOTICE
CAUTION
xvii