Table of Contents
Advertisement
12.3 File Transfer
12.3.2 FTP Client
Details on the FTP Server Details Dialog Box
The contents of the FTP Server Details Dialog Box are described in the following table.
No.
Use PASV mode.
Port Number
Keep login
Logout time
FTP Server IP
User Name
Password
Directory Path
OK Button
Cancel Button
12-28
Item
Specify whether to use PASV mode.
1 to 65,535
This setting is valid in PASV mode.
Specify whether to stay logged in.
1 to 60
This setting is valid only when you
specify staying logged in. The FTP cli-
ent will be logged out if this time
elapses before the next operation is
performed after the last log file is trans-
ferred.
Enter the IP address of the FTP server.
The setting range is determined by the
IP address rules for the 218IFD.
Enter the login name for the FTP
server.
Enter the login password for the FTP
server.
Set the directory path to which to write
data in the FTP server.
Click the OK Button to apply the
changes and end.
Click the Cancel Button to not apply
the changes and end.
Description
Remarks
If PASV mode is not specified,
ACTIV mode is used.
Port 21 is always used for ACTIV
mode.
If you do not specify staying logged
in, the FTP client will be logged out
each time a file is uploaded.
The FTP client will also be logged
out for FTP transfer errors or if the
CPU stops regardless of the logout
time setting.
The 218IFD settings are used for the
gateway IP address and subnet
mask.
1 to 32 characters
There are no restrictions to the char-
acters that can be used.
0 to 32 characters
There are no restrictions to the char-
acters that can be used.
0 to 64 characters
There are no restrictions to the char-
acters that can be used.
Use slashes to separate directories.
The file name that is specified for
logging is used as the name of the
file that is written.
−
−
Advertisement
Table of Contents
Troubleshooting
