Table of Contents
Advertisement
7.2 Creating Ladder Programs
• Double-click at the location at which to insert the NO Contact instruction, and select A: NO Con-
tact from the list.
• Select the location at which to insert the NO Contact instruction, and click the NO Contact
Button.
3.
Double-click the box with a question mark.
The Edit Parameter Dialog Box will be displayed.
4.
Enter MB000000 in the Variable/Register Box and click the OK Button.
MB000000 will be displayed for the NO Contact instruction.
7-40
Note: The type of register and data you can use depend on the actual instruction. Refer to the following
manual for details on each instruction.
Σ-7-Series Σ-7C SERVOPACK Motion Control User's Manual (Manual No.: SIEP S800002 03)
Advertisement
Table of Contents
Troubleshooting
