Table of Contents
Advertisement
in IENR2 is 1, timer G sends an interrupt request to the CPU. For details of the interrupt, see
section 3.3, Interrupts.
Count Timing
TCG is incremented by internal clock input. Bits CKS1 and CKS0 in TMG select one of four
internal clock sources (φ/64, φ/32, φ/2, or φw/4) created by dividing the system clock (φ) or watch
clock (φw).
Input Capture Input Timing
a. Without noise cancellation function
For input capture input, dedicated input capture functions are provided for rising and falling
edges.
Figure 9.11 shows the timing for rising/falling edge input capture input.
Input capture
input signal
Input capture
signal F
Input capture
signal R
Figure 9.11 Input Capture Input Timing (without Noise Cancellation Function)
b. With noise cancellation function
When noise cancellation is performed on the input capture input, the passage of the input
capture signal through the noise canceler results in a delay of five sampling clock cycles from
the input capture input signal edge.
Rev. 6.00, 08/04, page 281 of 628
Advertisement
Table of Contents
