MOV.B @IRR1:8,R1L ......... IRRI0 = 0 at this time
AND.B #B'11111101,R1L ..... Here, IRRI0 = 1
MOV.B R1L,@IRR1:8 ......... IRRI0 is cleared to 0
In the above example, it is assumed that an IRQ0 interrupt is generated while the AND.B
instruction is executing.
The IRQ0 interrupt is disabled because, although the original objective is clearing IRRI1,
IRRI0 is also cleared.
Rev. 6.00, 08/04, page 99 of 628