Juniper ACX1000 Configuration Manual page 2101

Table 127: show chassis fpc Output Fields (continued)
Field Name Field Description
Total DRAM, in megabytes, available to the FPC's processor.
Memory DRAM
(MB)
Percentage of heap space (dynamic memory) being used by the FPC's processor.
Heap Utilization
If this number exceeds 80 percent, there may be a software problem (memory
(%)
leak).
NOTE:
environment, heap utilization levels higher than 70 percent can affect unified
ISSU, router stability, or scaling capability.
Percentage of buffer space being used by the FPC's processor for buffering
Buffer Utilization
internal messages.
(%)
Total CPU DRAM Amount of DRAM available to the FPC's CPU.
Amount of reduced latency dynamic random access memory (RLDRAM)
Total RLDRAM
available to the FPC CPU.
Amount of double data rate dynamic random access memory (DDR DRAM)
Total DDR DRAM
available to the FPC CPU.
Total SRAM Amount of static RAM (SRAM) used by the FPC's CPU.
Total SDRAM Total amount of memory used for storing packets and notifications.
I/O Manager ASICs I/O Manager version number, manufacturer, and part number.
information
Start time Time when the Routing Engine detected that the FPC was running.
Uptime How long the Routing Engine has been connected to the FPC and, therefore,
how long the FPC has been up and running.
(
PIC type pic-status
GNF (Node slicing) GNF identifier associated with each line card.
(
pic-status
Sample Output
show chassis fpc (EX6210 Switch)
Copyright © 2017, Juniper Networks, Inc.
On MX Series routers and EX Series switches in a broadband edge
output only) Type of PIC.
output only) GNF identifier associated with each PIC.
user@switch> show chassis fpc
Temp
Slot State (C)
0 Empty
1 Online
2 Empty
CPU Utilization (%)
Total Interrupt
7 5 0
Chapter 42: Operational Commands
Level of Output
none specified
none specified
none specified
detail
detail
detail
detail
detail
detail
detail
detail
none specified
all levels
Memory Utilization (%)
DRAM (MB) Heap Buffer
1024 0 32
2043