Juniper ACX1000 Configuration Manual page 2151

Syntax (MX104,
MX2010, MX2020,
MX10003, and
MX2008 3D Universal
Edge Routers)
Syntax (QFX Series)
Syntax (OCX Series)
Syntax (PTX Series
Packet Transport
Routers)
Syntax (ACX Series
Universal Access
Routers)
Syntax (ACX5048 and
ACX5096 Routers)
Syntax (ACX500
Routers)
Release Information
Copyright © 2017, Juniper Networks, Inc.
<all-members>
<local>
<member member-id>
show chassis hardware
<clei-models>
<detail | extensive>
<models>
<satellite [slot-id slot-id |device-alias alias-name]>
show chassis hardware
<detail | extensive>
<clei-models>
<interconnect-device name>
<node-device name>
<models>
show chassis hardware
<detail | extensive>
<clei-models>
<models>
show chassis hardware
<detail | extensive>
<clei-models>
<models>
show chassis hardware
<detail | extensive>
<clei-models>
<models>
show chassis hardware
<detail | extensive>
<clei-models>
<models>
show chassis hardware
<detail | extensive>
<clei-models>
<models>
Command introduced before Junos OS Release 7.4.
option introduced in Junos OS Release 8.2.
models
Command introduced in Junos OS Release 9.0 for EX Series switches.
sfc option introduced in Junos OS Release 9.6 for the TX Matrix Plus router.
Command introduced in Junos OS Release 11.1 for QFX Series.
Command introduced in Junos OS Release 12.1X48 for PTX Series Packet Transport
Routers.
Chapter 42: Operational Commands
2093