Juniper ACX1000 Configuration Manual page 2100

ACX Series Universal Access Router Configuration Guide
Table 127: show chassis fpc Output Fields (continued)
Field Name Field Description
Slot number.
Logical slot
Temperature of the air passing by the FPC, in degrees Celsius or in both Celsius
Temp (C) or
and Fahrenheit.
Temperature
Temperature (PTX On PTX Series Packet Transport Routers, temperature details are provided in
degrees Celsius and Fahrenheit. Output includes:
Series)
Temperature (PMB)—Temperature of the air passing by the Processor
Mezzanine Board (PMB) at the bottom of the FPC.
Temperature (Intake)—Temperature of the air flowing into the chassis.
Temperature (Exhaust)—Exhaust temperatures for multiple zones (Exhaust
A and Exhaust B).
Temperature (TLn)-–Temperature of the specified Lookup ASIC (TL) of the
packet forwarding engine on the FPC.
Temperature (TQn)-–Temperature of the specified Queuing and Memory
Interface ASIC (TQ) of the packet forwarding engine on the FPC.
Total percentage of CPU being used by the FPC's processor.
Total CPU
Utilization (%)
Of the total CPU being used by the FPC's processor, the percentage being used
Interrupt CPU
for interrupts.
Utilization (%)
Information about the Routing Engine's CPU utilization in the past 1 minute.
1 min CPU
utilization (%)
NOTE: Supported
only on MX240,
MX480, MX960,
MX2010, MX2020,
and MX2008.
Information about the Routing Engine's CPU utilization in the past 5 minutes.
5 min CPU
utilization (%)
NOTE: Supported
only on MX240,
MX480, MX960,
MX2010, MX2020,
and MX2008.
15 min CPU Information about the Routing Engine's CPU utilization in the past 15 minutes.
utilization (%)
NOTE: Supported
only on MX240,
MX480, MX960,
MX2010, MX2020,
and MX2008.
2042
Level of Output
all levels
all levels
all levels
detail
all levels
none specified
none specified
none specified
none specified
Copyright © 2017, Juniper Networks, Inc.