Enabling Ieee 802.3Ah Oam Support; Configuring The Oam Pdu Interval - Juniper EX9200 Features Manual

Network Management and Monitoring Feature Guide for EX9200 Switches

Enabling IEEE 802.3ah OAM Support

Related
Documentation

Configuring the OAM PDU Interval

6
Example: Configuring IEEE 802.3ah OAM Support on an Interface on page 21
Ethernet Interfaces Feature Guide for Routing Devices
To enable IEEE 802.3ah OAM support, include the
protocols oam ethernet link-fault-management]
[edit protocols oam ethernet link-fault-management
When you enable IEEE 802.3ah OAM on a physical interface, the discovery process is
automatically triggered.
link-fault-management on page 45
IEEE 802.3ah OAM Link-Fault Management Overview on page 3
Configuring IEEE 802.3ah OAM Link-Fault Management on page 5
Configuring Link Discovery on page 16
Configuring the OAM PDU Interval on page 6
Configuring the OAM PDU Threshold on page 7
Configuring Threshold Values for Local Fault Events on an Interface on page 17
Disabling the Sending of Link Event TLVs on page 18
Detecting Remote Faults on page 18
Configuring an OAM Action Profile on page 8
Specifying the Actions to Be Taken for Link-Fault Management Events on page 19
Monitoring the Loss of Link Adjacency on page 12
Monitoring Protocol Status on page 13
Configuring Threshold Values for Fault Events in an Action Profile on page 10
Applying an Action Profile on page 10
Setting a Remote Interface into Loopback Mode on page 11
Enabling Remote Loopback Support on the Local Interface on page 15
Example: Configuring IEEE 802.3ah OAM Support on an Interface on page 21
Ethernet Interfaces Feature Guide for Routing Devices
Periodic OAM PDUs are sent to perform link monitoring.
You can specify the periodic OAM PDU sending interval for fault detection.
statement at the
interface
hierarchy level:
interface interface-name]
Copyright © 2016, Juniper Networks, Inc.
[edit