WAGO-I/O-SYSTEM 750
750-8207 PFC200 CS 2ETH RS 3G
5.
WAGO-I/O-CHECK is started.
Figure 58: WAGO-I/O-CHECK – Starting Screen
6.
To connect to the controller and read in the module configuration, click
[Identify].
7.
If this action is successful click [Save] and exit WAGO-I/O-CHECK.
Draft version 1.2.1 from 2017-09-13, valid from FW Version 02.06.20(09)
Run-time System CODESYS 2.3 227
Manual