Figure 59: I/O Configurator Empty; Figure 60: "Add I/O Modules" Button - WAGO 750-8207 Manual

228 Run-time System CODESYS 2.3
8. The detected I/O modules then appear in the configuration window.
Passive I/O Modules
Remember that passive I/O modules, such as a power supply module (750-602)
or end module (750-600) will not be shown in the I/O configurator.

Figure 59: I/O Configurator Empty

9. You can use the [Add] button to add new I/O modules to manually define
or change the configuration.

Figure 60: "Add I/O Modules" Button

Manual
Draft version 1.2.1 from 2017-09-13, valid from FW Version 02.06.20(09)
WAGO-I/O-SYSTEM 750
750-8207 PFC200 CS 2ETH RS 3G