Ports And Services" > "Https" Submenu; Ports And Services" > "Ntp" Submenu; Table 170: "Ports And Services" > "Https" Submenu; Table 171: "Ports And Services" > "Ntp" Submenu - WAGO 750-8207 Manual

202 Commissioning
7.8.4.11.5 "Ports and Services" > "HTTPS" Submenu
This submenu contains the settings for the HTTPS service.
Table 170: "Ports and Services" > "HTTPS" Submenu
Menu Item
0. Back to ...
1. State
2. Firewall status
To make a selection, choose the appropriate menu item.
To return to the higher-level menu, press [Q].
7.8.4.11.6 "Ports and Services" > "NTP" Submenu
This submenu contains the settings for the NTP service.
Table 171: "Ports and Services" > "NTP" Submenu
Menu Item
0. Back to ...
1. State
2. Port
3. Time Server 1
4. Time Server 2
5. Time Server 3
6. Time Server 4
7. Update Time
8. Issue immediate update
To make a selection, choose the appropriate menu item.
To return to the higher-level menu, press [Q].
Click [<OK>] to apply the entry.
Click [<Abort>] to discard the entry.
Manual
Draft version 1.2.1 from 2017-09-13, valid from FW Version 02.06.20(09)
750-8207 PFC200 CS 2ETH RS 3G
Submenu Item / Explanation
Back to the higher-level menu
Enable/disable the HTTPS service.
0. Back to ... Back to the higher-level menu
1. Enable The HTTPS service is enabled.
2. Disable The HTTPS service is disabled.
Opens a submenu with firewall settings for the this
service for the interfaces
Submenu Item / Explanation
Back to the higher-level menu
Enable/disable the NTP service.
0. Back to ... Back to the higher-level menu
1. Enable The NTP service is enabled.
2. Disable The NTP service is disabled.
Enter the port number of the NTP server.
Enter here the IP addresses of up to 4 time servers.
Time server No. 1 is requested first of all. If no data
can be accessed via time server No. 1, time server
No. 2 is requested.
Specify here the update interval of the time server.
To update the time immediately, irrespective of the
update interval, select this menu item.
WAGO-I/O-SYSTEM 750