Configuration; Figure 105: Codesys Plc Configuration - Modbus Settings - WAGO 750-8207 Manual

278 MODBUS – CODESYS 2
10.3

Configuration

All of the MODBUS operating modes are configured using the CODESYS PLC
configuration.

Figure 105: CODESYS PLC Configuration - MODBUS Settings

The MODBUS slave configuration is composed of four basic parameter groups:
• MODBUS settings,
• MODBUS TCP settings,
• MODBUS UDP settings,
• MODBUS RTU settings.
A detailed description of all the parameter groups is given in the following
sections.
Manual
Draft version 1.2.1 from 2017-09-13, valid from FW Version 02.06.20(09)
WAGO-I/O-SYSTEM 750
750-8207 PFC200 CS 2ETH RS 3G